Calcea® Lime Fine Plaster
Spreading Ratewith a plaster application of 3 mm approx. 6.75 m2 each 25 kg bag
Water Consumptionapprox. 8 l each bag
Weight25kg
CompositionCALCEA® fine lime plaster consists of natural hydraulic lime acc. to EN 459-1 and light-coloured marble sands.
Properties• free of cement
• suitable for allergy sufferrers
• highly permeable
• moisture- and climate regulating
• exclusively consists of natural raw materials
• low-tension hardening process
• no mold formation due to high alkalinity
• designable in many ways
ApplicationIn the interior and exterior, in particular in biological, ecological building as well as cultural heritage protection. Excellently suitable as finishing plaster for CALCEA® lime priming plaster and all mineral priming plasters. If CALCEA® fine lime plaster shall be used in exterior areas, please contact our technical consultants. In principle, a final coating with CALCEA® lime paint, CALCEA® lime full-tone paint or CALCEA® lime slurries is required for outdoor use.
Plaster substrateThe plaster substrate must be dry, clean and free from loosely attached particles. Always carry out plaster substrate test according to VOB/C and DIN 18350.
ProcessingProcessing by hand as well as with all common plaster machines. CALCEA® fine lime plaster is applied with a steel trowel on the covering the complete surface. The mortar applied can be structured or felting or smoothing in a fresh condition using a scoop, trowel or spatula.
Special notesProtect fresh plaster against fast drying-up. The air and surface temperature must be at least 5 ° C and maximum 25 ° C. CALCEA® fine lime plaster shall only be used in the original state without additives.
StorageDry, if possible on wooden shelves and protected against draft.
Technical dataMortar group: CS I acc. to EN 998-1 PIc acc. to DIN 18550
Fire Class: A1
Grain size: 0 - 0.6 mm
Solid mortar raw density: 1.40 kg/dm3
Compressive strength 28 days: approx. 1.0 N/mm2
E-Module: approx. 1400 N/mm2
Water vapour diffusion
resistance factor µ: < 8
Water absorption: W0
Safety instructionsMortal will react very alkaline with water, thus: Protect skin and eyes, rinse thoroughly with water in case of contact, immediately contact doctor in case of eye contact.
Quality-monitored productionCALCEA® fine lime plaster is continuously tested in our plant laboratory within the scope of our in-house monitoring with respect to the fulfilment of composition and properties. This will ensure a uniform quality of the product. CALCEA® fine lime plaster has the quality certificate „RAL plant dry mortar“ and is certified acc. to EN 998-1.